The most likely cause of this is your antivirus program. Try temporarily disabling it and see if it does the trick.
calibre supports the conversion of many input formats to many output formats. It can convert every input format in the following list, to every output format.
Input Formats: CBZ, CBR, CBC, CHM, DJVU, EPUB, FB2, HTML, HTMLZ, LIT, LRF, MOBI, ODT, PDF, PRC, PDB, PML, RB, RTF, SNB, TCR, TXT, TXTZ
Output Formats: AZW3, EPUB, FB2, OEB, LIT, LRF, MOBI, HTMLZ, PDB, PML, RB, PDF, RTF, SNB, TCR, TXT, TXTZ
PRC is a generic format, calibre supports PRC files with TextRead and MOBIBook headers. PDB is also a generic format. calibre supports eReder, Plucker, PML and zTxt PDB files. DJVU support is only for converting DJVU files that contain embedded text. These are typically generated by OCR software. MOBI books can be of two types Mobi6 and KF8. calibre fully supports both. MOBI files often have .azw or .azw3 file extensions
In order of decreasing preference: LIT, MOBI, AZW, EPUB, AZW3, FB2, HTML, PRC, RTF, PDB, TXT, PDF
PDF is a terrible format to convert from. For a list of the various issues you will encounter when converting PDF, see: Convert PDF documents.
The first thing to realize is that most ebooks have two tables of contents. One is the traditional Table of Contents, like the TOC you find in paper books. This Table of Contents is part of the main document flow and can be styled however you like. This TOC is called the content TOC.
Then there is the metadata TOC. A metadata TOC is a TOC that is not part of the book text and is typically accessed by some special button on a reader. For example, in the calibre viewer, you use the Show Table of Contents button to see this TOC. This TOC cannot be styled by the book creator. How it is represented is up to the viewer program.
In the MOBI format, the situation is a little confused. This is because the MOBI format, alone amongst mainstream ebook formats, does not have decent support for a metadata TOC. A MOBI book simulates the presence of a metadata TOC by putting an extra content TOC at the end of the book. When you click Goto Table of Contents on your Kindle, it is to this extra content TOC that the Kindle takes you.
Now it might well seem to you that the MOBI book has two identical TOCs. Remember that one is semantically a content TOC and the other is a metadata TOC, even though both might have exactly the same entries and look the same. One can be accessed directly from the Kindle’s menus, the other cannot.
When converting to MOBI, calibre detects the metadata TOC in the input document and generates an end-of-file TOC in the output MOBI file. You can turn this off by an option in the MOBI Output settings. You can also tell calibre whether to put it and the start or the end of the book via an option in the MOBI Output settings. Remember this TOC is semantically a metadata TOC, in any format other than MOBI it cannot not be part of the text. The fact that it is part of the text in MOBI is an accident caused by the limitations of MOBI. If you want a TOC at a particular location in your document text, create one by hand. So we strongly recommend that you leave the default as it is, i.e. with the metadata TOC at the end of the book.
If you have a hand edited TOC in the input document, you can use the TOC detection options in calibre to automatically generate the metadata TOC from it. See the conversion section of the User Manual for more details on how to use these options.
Finally, I encourage you to ditch the content TOC and only have a metadata TOC in your ebooks. Metadata TOCs will give the people reading your ebooks a much superior navigation experience (except on the Kindle, where they are essentially the same as a content TOC).
This is caused by a bug in the Amazon software. You can work around it by going to Preferences->Output Options->MOBI output and setting the “Enable sharing of book content” option. If you are reconverting a previously converted book, you will also have to enable the option in the conversion dialog for that individual book (as per book conversion settings are saved and take precedence).
Note that doing this will mean that the generated MOBI will show up under personal documents instead of Books on the Kindle Fire and Amazon whispersync will not work, but the covers will. It’s your choice which functionality is more important to you. I encourage you to contact Amazon and ask them to fix this bug.
In order to convert a collection of HTML files in a specific oder, you have to create a table of contents file. That is, another HTML file that contains links to all the other files in the desired order. Such a file looks like:
<html> <body> <h1>Table of Contents</h1> <p style="text-indent:0pt"> <a href="file1.html">First File</a><br/> <a href="file2.html">Second File</a><br/> . . . </p> </body> </html>
Then, just add this HTML file to the GUI and use the convert button to create your ebook. You can use the option in the Table of Contents section in the conversion dialog to control how the Table of Contents is generated.
By default, when adding HTML files, calibre follows links in the files in depth first order. This means that if file A.html links to B.html and C.html and D.html, but B.html also links to D.html, then the files will be in the order A.html, B.html, D.html, C.html. If instead you want the order to be A.html, B.html, C.html, D.html then you must tell calibre to add your files in breadth first order. Do this by going to Preferences->Plugins and customizing the HTML to ZIP plugin.
calibre does not guarantee that an EPUB produced by it is valid. The only guarantee it makes is that if you feed it valid XHTML 1.1 + CSS 2.1 it will output a valid EPUB. calibre is designed for ebook consumers, not producers. It tries hard to ensure that EPUBs it produces actually work as intended on a wide variety of devices, a goal that is incompatible with producing valid EPUBs, and one that is far more important to the vast majority of its users. If you need a tool that always produces valid EPUBs, calibre is not for you.
You can get help on any individual feature of the converters by mousing over it in the GUI or running ebook-convert dummy.html .epub -h at a terminal. A good place to start is to look at the following demo file that demonstrates some of the advanced features html-demo.zip
calibre can directly connect to all the major (and most of the minor) ebook reading devices, smarthphones, tablets, etc. In addition, using the Connect to folder function you can use it with any ebook reader that exports itself as a USB disk. You can even connect to Apple devices (via iTunes), using the Connect to iTunes function.
If your device appears as a USB disk to the operating system, adding support for it to calibre is very easy. We just need some information from you:
- Complete list of ebook formats that your device supports.
- Is there a special directory on the device in which all ebook files should be placed? Also does the device detect files placed in sub directories?
- We also need information about your device that calibre will collect automatically. First, if your device supports SD cards, insert them. Then connect your device to the computer. In calibre go to Preferences->Advanced->Miscellaneous and click the “Debug device detection” button. This will create some debug output. Copy it to a file and repeat the process, this time with your device disconnected from your computer.
- Send both the above outputs to us with the other information and we will write a device driver for your device.
Once you send us the output for a particular operating system, support for the device in that operating system will appear in the next release of calibre. To send us the output, open a bug report and attach the output to it. See calibre bugs.
Follow these steps to find the problem:
- Make sure that you are connecting only a single device to your computer at a time. Do not have another calibre supported device like an iPhone/iPad etc. at the same time.
- If you are connecting an Apple iDevice (iPad, iPod Touch, iPhone), use the ‘Connect to iTunes’ method in the ‘Getting started’ instructions in Calibre + Apple iDevices: Start here.
- Make sure you are running the latest version of calibre. The latest version can always be downloaded from the calibre website. You can tell what version of calibre you are currently running by looking at the bottom line of the main calibre window.
- Ensure your operating system is seeing the device. That is, the device should show up in Windows Explorer (in Windows) or Finder (in OS X).
- In calibre, go to Preferences->Ignored Devices and check that your device is not being ignored
- If all the above steps fail, go to Preferences->Miscellaneous and click debug device detection with your device attached and post the output as a ticket on the calibre bug tracker.
In addition to the Connect to Folder function found under the Connect/Share button, calibre provides a User Defined device plugin that can be used to connect to any USB device that shows up as a disk drive in your operating system. Note: on windows, the device must have a drive letter for calibre to use it. See the device plugin Preferences -> Plugins -> Device Plugins -> User Defined and Preferences -> Miscellaneous -> Get information to setup the user defined device for more information. Note that if you are using the user defined plugin for a device normally detected by a builtin calibre plugin, you must disable the builtin plugin first, so that your user defined plugin is used instead.
When calibre connects with the reader, it retrieves all collections for the books on the reader. The collections of which books are members are shown on the device view.
When you send a book to the reader, calibre will add the book to collections based on the metadata for that book. By default, collections are created from tags and series. You can control what metadata is used by going to Preferences->Advanced->Plugins->Device Interface plugins and customizing the SONY device interface plugin. If you remove all values, calibre will not add the book to any collection.
Collection management is largely controlled by the ‘Metadata management’ option found at Preferences->Import/Export->Sending books to devices. If set to ‘Manual’ (the default), managing collections is left to the user; calibre will not delete already existing collections for a book on your reader when you resend the book to the reader, but calibre will add the book to collections if necessary. To ensure that the collections for a book are based only on current calibre metadata, first delete the books from the reader, then resend the books. You can edit collections directly on the device view by double-clicking or right-clicking in the collections column.
If ‘Metadata management’ is set to ‘Only on send’, then calibre will manage collections more aggressively. Collections will be built using calibre metadata exclusively. Sending a book to the reader will correct the collections for that book so its collections exactly match the book’s metadata, adding and deleting collections as necessary. Editing collections on the device view is not permitted, because collections not in the metadata will be removed automatically.
If ‘Metadata management’ is set to ‘Automatic management’, then calibre will update metadata and collections both when the reader is connected and when books are sent. When calibre detects the reader and generates the list of books on the reader, it will send metadata from the library to the reader for all books on the reader that are in the library (On device is True), adding and removing books from collections as indicated by the metadata and device customization. When a book is sent, calibre corrects the metadata for that book, adding and deleting collections. Manual editing of metadata on the device view is not allowed. Note that this option specifies sending metadata, not books. The book files on the reader are not changed.
In summary, choose ‘manual management’ if you want to manage collections yourself. Collections for a book will never be removed by calibre, but can be removed by you by editing on the device view. Choose ‘Only on send’ if you want calibre to manage collections when you send a book, adding books to and removing books from collections as needed. Choose ‘Automatic management’ if you want calibre to keep collections up to date whenever the reader is connected.
If you use multiple installations of calibre to manage your reader, then option ‘Automatic management’ may not be what you want. Connecting the reader to one library will reset the metadata to what is in that library. Connecting to the other library will reset the metadata to what is in that other library. Metadata in books found in both libraries will be flopped back and forth.
Yes, you can use both, provided you do not run them at the same time. That is, you should use the following sequence: Connect reader->Use one of the programs->Disconnect reader. Reconnect reader->Use the other program->disconnect reader.
The underlying reason is that the Reader uses a single file to keep track of ‘meta’ information, such as collections, and this is written to by both calibre and the Sony software when either updates something on the Reader. The file will be saved when the Reader is (safely) disconnected, so using one or the other is safe if there’s a disconnection between them, but if you’re not the type to remember this, then the simple answer is to stick to one or the other for the transfer and just export/import from/to the other via the computers hard disk.
If you do need to reset your metadata due to problems caused by using both at the same time, then just delete the media.xml file on the Reader using your PC’s file explorer and it will be recreated after disconnection.
With recent reader iterations, SONY, in all its wisdom has decided to try to force you to use their software. If you install it, it auto-launches whenever you connect the reader. If you don’t want to uninstall it altogether, there are a couple of tricks you can use. The simplest is to simply re-name the executable file that launches the library program. More detail in the forums.
The easiest way to browse your calibre collection on your Apple device (iPad/iPhone/iPod) is by using the calibre content server, which makes your collection available over the net. First perform the following steps in calibre
- Set the Preferred Output Format in calibre to EPUB (The output format can be set under Preferences->Interface->Behavior)
- Set the output profile to iPad (this will work for iPhone/iPods as well), under Preferences->Conversion->Common Options->Page Setup
- Convert the books you want to read on your iDevice to EPUB format by selecting them and clicking the Convert button.
- Turn on the Content Server by clicking the Connect/Share button and leave calibre running. You can also tell calibre to automatically start the content server via Preferences->Sharing over the net.
There are many apps for your iDevice that can connect to calibre. Here we describe using two of them, iBooks and Stanza.
You should be able to access your books on your iPhone by opening Stanza. Go to “Get Books” and then click the “Shared” tab. Under Shared you will see an entry “Books in calibre”. If you don’t, make sure your iPad/iPhone is connected using the WiFi network in your house, not 3G. If the calibre catalog is still not detected in Stanza, you can add it manually in Stanza. To do this, click the “Shared” tab, then click the “Edit” button and then click “Add book source” to add a new book source. In the Add Book Source screen enter whatever name you like and in the URL field, enter the following:
Replace 192.168.1.2 with the local IP address of the computer running calibre. If you have changed the port the calibre content server is running on, you will have to change 8080 as well to the new port. The local IP address is the IP address you computer is assigned on your home network. A quick Google search will tell you how to find out your local IP address. Now click “Save” and you are done.
If you get timeout errors while browsing the calibre catalog in Stanza, try increasing the connection timeout value in the stanza settings. Go to Info->Settings and increase the value of Download Timeout.
Start the Safari browser and type in the IP address and port of the computer running the calibre server, like this:
Replace 192.168.1.2 with the local IP address of the computer running calibre. If you have changed the port the calibre content server is running on, you will have to change 8080 as well to the new port. The local IP address is the IP address you computer is assigned on your home network. A quick Google search will tell you how to find out your local IP address.
You will see a list of books in Safari, just click on the epub link for whichever book you want to read, Safari will then prompt you to open it with iBooks.
Use the ‘Connect to iTunes’ method in the ‘Getting started’ instructions in Calibre + Apple iDevices: Start here.
This method only works on Windows XP and higher, and OS X 10.5 and higher. Linux is not supported (iTunes is not available in linux) and OS X 10.4 is not supported.
There are two ways that you can connect your Android device to calibre. Using a USB cable – or wirelessly, over the air. The first step to using an Android device is installing an ebook reading application on it. There are many free and paid ebook reading applications for Android: Some examples (in no particular order): FBReader, Moon+, Mantano, Aldiko, Kindle.
Simply plug your device into the computer with a USB cable. calibre should automatically detect the device and then you can transfer books to it by clicking the Send to Device button. calibre does not have support for every single android device out there, so if your device is not automatically detected, follow the instructions at How can I help get my device supported in calibre? to get your device supported in calibre.
With newer Android devices, the USB connection is only supported on Windows Vista and newer and Linux. If you are on Windows XP or OS X, you should use one of the wireless connection methods.
The easiest way to transfer books wirelessly to your Android device is to use the Calibre Companion Android app. This app is maintained by a core calibre developer and allows calibre to connect to your Android device wirelessly, just as though you plugged in the device with a USB cable. You can browse files on the device in calibre and use the Send to device button to transfer files to your device wirelessly.
calibre also has a builtin web server, the Content Server. You can browse your calibre collection on your Android device is by using the calibre content server, which makes your collection available over the net. First perform the following steps in calibre
- Set the Preferred Output Format in calibre to EPUB for normal Android devices or MOBI for Kindles (The output format can be set under Preferences->Interface->Behavior)
- Convert the books you want to read on your device to EPUB/MOBI format by selecting them and clicking the Convert button.
- Turn on the Content Server in calibre‘s preferences and leave calibre running.
Now on your Android device, open the browser and browse to
Replace 192.168.1.2 with the local IP address of the computer running calibre. If your local network supports the use of computer names, you can replace the IP address with the network name of the computer. If you have changed the port the calibre content server is running on, you will have to change 8080 as well to the new port.
The local IP address is the IP address you computer is assigned on your home network. A quick Google search will tell you how to find out your local IP address. You can now browse your book collection and download books from calibre to your device to open with whatever ebook reading software you have on your android device.
Some reading programs support browsing the Calibre library directly. For example, in Aldiko, click My Catalogs, then + to add a catalog, then give the catalog a title such as “Calibre” and provide the URL listed above. You can now browse the Calibre library and download directly into the reading software.
calibre has a Content Server that exports the books in calibre as a web page. You can turn it on under Preferences->Network->Sharing over the net. Then just point the web browser on your device to the computer running the Content Server and you will be able to browse your book collection. For example, if the computer running the server has IP address 184.108.40.206, in the browser, you would type:
Some devices, like the Kindle (1/2/DX), do not allow you to access port 8080 (the default port on which the content server runs. In that case, change the port in the calibre Preferences to 80. (On some operating systems, you may not be able to run the server on a port number less than 1024 because of security settings. In this case the simplest solution is to adjust your router to forward requests on port 80 to port 8080).
The most likely cause of this is your antivirus program. Try temporarily disabling it and see if it does the trick.
Because of the large amount of spam in email, sending email can be tricky, as different mail servers use different strategies to block email. The most common problem is if you are sending email directly (without a mail relay) in calibre. Many servers (for example, Amazon) block email that does not come from a well known relay. The most robust way to setup email sending in calibre is to do the following:
- Create a free GMail account at Google.
- Goto Preferences->Email in calibre and click the “Use Gmail” button and fill in the information asked for.
- calibre will then use GMail to send the mail.
- If you are sending to your Kindle, remember to update the email preferences on your Amazon Kindle page to allow email sent from your GMail email address.
Even after doing this, you may have problems. One common source of problems is that some poorly designed antivirus programs block calibre from opening a connection to send email. Try adding an exclusion for calibre in your antivirus program.
Google can disable your account if you use it to send large amounts of email. So, when using GMail to send mail calibre automatically restricts itself to sending one book every five minutes. If you don’t mind risking your account being blocked you can reduce this wait interval by going to Preferences->Tweaks in calibre.
calibre needs your linux kernel to have been setup correctly to detect devices. If your devices are not detected, perform the following tests:
grep SYSFS_DEPRECATED /boot/config-`uname -r`
You should see something like CONFIG_SYSFS_DEPRECATED_V2 is not set. Also,
grep CONFIG_SCSI_MULTI_LUN /boot/config-`uname -r`
must return CONFIG_SCSI_MULTI_LUN=y. If you don’t see either, you have to recompile your kernel with the correct settings.
Linux kernels mount devices read-only when their filesystems have errors. You can repair the filesystem with:
sudo fsck.vfat -y /dev/sdc
Replace /dev/sdc with the path to the device node of your device. You can find the device node of your device, which will always be under /dev by examining the output of:
Neither the Kindle nor the Nook provide any way to manipulate collections over a USB connection. If you really care about using collections, I would urge you to sell your Kindle/Nook and get a SONY. Only SONY seems to understand that life is too short to be entering collections one by one on an e-ink screen :)
Note that in the case of the Kindle, there is a way to manipulate collections via USB, but it requires that the Kindle be rebooted every time it is disconnected from the computer, for the changes to the collections to be recognized. As such, it is unlikely that any calibre developers will ever feel motivated enough to support it. There is however, a calibre plugin that allows you to create collections on your Kindle from the calibre metadata. It is available from here.
Amazon have removed the ability to manipulate collections completely in their newer models, like the Kindle Touch and Kindle Fire, making even the above plugin useless. If you really want the ability to manage collections on your Kindle via a USB connection, we encourage you to complain to Amazon about it, or get a reader where this is supported, like the SONY or Kobo Readers.
The Kobo has very buggy firmware. Connecting to it has been known to fail at random. Certain combinations of motherboard, USB ports/cables/hubs can exacerbate this tendency to fail. If you are getting an error when connecting to your touch with calibre try the following, each of which has solved the problem for some calibre users.
- Connect the Kobo directly to your computer, not via USB Hub
- Try a different USB cable and a different USB port on your computer
- Try a different computer (preferably an older model)
- Try upgrading the firmware on your Kobo Touch to the latest
- Try resetting the Kobo (sometimes this cures the problem for a little while, but then it re-appears, in which case you have to reset again and again)
- Try only putting one or two books onto the Kobo at a time and do not keep large collections on the Kobo
calibre reads metadata from the following formats: CHM, LRF, PDF, LIT, RTF, OPF, MOBI, PRC, EPUB, FB2, IMP, RB, HTML. In addition it can write metadata to: LRF, RTF, OPF, EPUB, PDF, MOBI
When you first run calibre, it will ask you for a folder in which to store your books. Whenever you add a book to calibre, it will copy the book into that folder. Books in the folder are nicely arranged into sub-folders by Author and Title. Note that the contents of this folder are automatically managed by calibre, do not add any files/folders manually to this folder, as they may be automatically deleted. If you want to add a file associated to a particular book, use the top right area of Edit metadata dialog to do so. Then, calibre will automatically put that file into the correct folder and move it around when the title/author changes.
Metadata about the books is stored in the file metadata.db at the top level of the library folder This file is is a sqlite database. When backing up your library make sure you copy the entire folder and all its sub-folders.
The library folder and all it’s contents make up what is called a calibre library. You can have multiple such libraries. To manage the libraries, click the calibre icon on the toolbar. You can create new libraries, remove/rename existing ones and switch between libraries easily.
You can copy or move books between different libraries (once you have more than one library setup) by right clicking on a book and selecting the Copy to library action.
The whole point of calibre‘s library management features is that they provide a search and sort based interface for locating books that is much more efficient than any possible directory scheme you could come up with for your collection. Indeed, once you become comfortable using calibre‘s interface to find, sort and browse your collection, you wont ever feel the need to hunt through the files on your disk to find a book again. By managing books in its own directory structure of Author -> Title -> Book files, calibre is able to achieve a high level of reliability and standardization. To illustrate why a search/tagging based interface is superior to folders, consider the following. Suppose your book collection is nicely sorted into folders with the following scheme:
Genre -> Author -> Series -> ReadStatus
Now this makes it very easy to find for example all science fiction books by Isaac Asimov in the Foundation series. But suppose you want to find all unread science fiction books. There’s no easy way to do this with this folder scheme, you would instead need a folder scheme that looks like:
ReadStatus -> Genre -> Author -> Series
In calibre, you would instead use tags to mark genre and read status and then just use a simple search query like tag:scifi and not tag:read. calibre even has a nice graphical interface, so you don’t need to learn its search language instead you can just click on tags to include or exclude them from the search.
To those of you that claim that you need access to the filesystem to so that you can have access to your books over the network, calibre has an excellent content server that gives you access to your calibre library over the net.
If you are worried that someday calibre will cease to be developed, leaving all your books marooned in its folder structure, explore the powerful “Save to Disk” feature in calibre that lets you export all your files into a folder structure of arbitrary complexity based on their metadata.
Finally, the reason there are numbers at the end of every title folder, is for robustness. That number is the id number of the book record in the calibre database. The presence of the number allows you to have multiple records with the same title and author names. It is also part of what allows calibre to magically regenerate the database with all metadata if the database file gets corrupted. Given that calibre‘s mission is to get you to stop storing metadata in filenames and stop using the filesystem to find things, the increased robustness afforded by the id numbers is well worth the uglier folder names.
If you are still not convinced, then I’m afraid calibre is not for you. Look elsewhere for your book cataloguing needs. Just so we’re clear, this is not going to change. Kindly do not contact us in an attempt to get us to change this.
calibre is designed to have columns for the most frequently and widely used fields. In addition, you can add any columns you like. Columns can be added via Preferences->Interface->Add your own columns. Watch the tutorial UI Power tips to learn how to create your own columns.
You can also create “virtual columns” that contain combinations of the metadata from other columns. In the add column dialog use the Quick create links to easily create columns to show the book ISBN, formats or the time the book was last modified. For more details, see The calibre template language.
Yes, you can. Follow the instructions in the answer above for adding custom columns.
Simply copy the calibre library folder from the old to the new computer. You can find out what the library folder is by clicking the calibre icon in the toolbar. The very first item is the path to the library folder. Now on the new computer, start calibre for the first time. It will run the Welcome Wizard asking you for the location of the calibre library. Point it to the previously copied folder. If the computer you are transferring to already has a calibre installation, then the Welcome wizard wont run. In that case, right-click the calibre icon in the tooolbar and point it to the newly copied directory. You will now have two calibre libraries on your computer and you can switch between them by clicking the calibre icon on the toolbar. Transferring your library in this manner preserver all your metadata, tags, custom columns, etc.
Note that if you are transferring between different types of computers (for example Windows to OS X) then after doing the above you should also right-click the calibre icon on the tool bar, select Library Maintenance and run the Check Library action. It will warn you about any problems in your library, which you should fix by hand.
A calibre library is just a folder which contains all the book files and their metadata. All the metadata is stored in a single file called metadata.db, in the top level folder. If this file gets corrupted, you may see an empty list of books in calibre. In this case you can ask calibre to restore your books by doing a right-click on the calibre icon in the toolbar and selecting Library Maintenance->Restore Library.
In order to understand why that happened, you have to understand what a calibre library is. At the most basic level, a calibre library is just a folder. Whenever you add a book to calibre, that book’s files are copied into this folder (arranged into sub folders by author and title). Inside the calibre library folder, at the top level, you will see a file called metadata.db. This file is where calibre stores the metadata like title/author/rating/tags etc. for every book in your calibre library. The list of books that calibre displays is created by reading the contents of this metadata.db file.
There can be two reasons why calibre is showing a empty list of books:
- Your calibre library folder changed its location. This can happen if it was on an external disk and the drive letter for that disk changed. Or if you accidentally moved the folder. In this case, calibre cannot find its library and so starts up with an empty library instead. To remedy this, do a right-click on the calibre icon in the calibre toolbar (it will say 0 books underneath it) and select Switch/create library. Click the little blue icon to select the new location of your calibre library and click OK.
- Your metadata.db file was deleted/corrupted. In this case, you can ask calibre to rebuild the metadata.db from its backups. Right click the calibre icon in the calibre toolbar (it will say 0 books underneath it) and select Library maintenance->Restore database. calibre will automatically rebuild metadata.db.
Do not put your calibre library on a networked drive.
A filesystem is a complex beast. Most network filesystems lack various filesystem features that calibre uses. Some dont support file locking, some dont support hardlinking, some are just flaky. Additionally, calibre is a single user application, if you accidentally run two copies of calibre on the same networked library, bad things will happen. Finally, different OSes impose different limitations on filesystems, so if you share your networked drive across OSes, once again, bad things will happen.
Consider using the calibre Content Server to make your books available on other computers. Run calibre on a single computer and access it via the Content Server or a Remote Desktop solution.
If you must share the actual library, use a file syncing tool like DropBox or rsync or Microsoft SkyDrive instead of a networked drive. If you are using a file-syncing tool it is essential that you make sure that both calibre and the file syncing tool do not try to access the calibre library at the same time. In other words, do not run the file syncing tool and calibre at the same time.
Even with these tools there is danger of data corruption/loss, so only do this if you are willing to live with that risk. In particular, be aware that Google Drive is incompatible with calibre, if you put your calibre library in Google Drive, you will suffer data loss. See this thread for details.
Start the Add custom news sources dialog (from the Fetch news menu) and click the Switch to advanced mode button. Delete everything in the box with the recipe source code and copy paste the contents of your .py file into the box. Click Add/update recipe.
If you are reasonably proficient with computers, you can teach calibre to download news from any website of your choosing. To learn how to do this see Adding your favorite news website.
Otherwise, you can request a particular news site by posting in the calibre Recipes forum.
calibre is pronounced as cal-i-ber not ca-li-bre. If you’re wondering, calibre is the British/commonwealth spelling for caliber. Being Indian, that’s the natural spelling for me.
calibre embeds fonts in ebook files it creates. Ebook files support embedding only TrueType (.ttf) fonts. Most fonts on OS X systems are in .dfont format, thus they cannot be embedded. calibre shows only TrueType fonts found on your system. You can obtain many TrueType fonts on the web. Simply download the .ttf files and add them to the Library/Fonts directory in your home directory.
There can be several causes for this:
If you get an error about calibre not being able to open a file because it is in use by another program, do the following:
- Uninstall calibre
- Reboot your computer
- Re-install calibre. But do not start calibre from the installation wizard.
- Temporarily disable your antivirus program (disconnect from the Internet before doing so, to be safe)
- Look inside the folder you chose for your calibre library. If you see a file named metadata.db, delete it.
- Start calibre
- From now on you should be able to start calibre normally.
If you get an error about a Python function terminating unexpectedly after upgrading calibre, first uninstall calibre, then delete the folders (if they exists) C:\Program Files\Calibre and C:\Program Files\Calibre2. Now re-install and you should be fine.
If you get an error in the welcome wizard on an initial run of calibre, try choosing a folder like C:\library as the calibre library (calibre sometimes has trouble with library locations if the path contains non-English characters, or only numbers, etc.)
Try running it as Administrator (Right click on the icon and select “Run as Administrator”)
Windows Vista: If the folder C:\Users\Your User Name\AppData\Local\VirtualStore\Program Files\calibre exists, delete it. Uninstall calibre. Reboot. Re-install.
Any windows version: Try disabling any antivirus program you have running and see if that fixes it. Also try disabling any firewall software that prevents connections to the local computer.
If it still wont launch, start a command prompt (press the windows key and R; then type cmd.exe in the Run dialog that appears). At the command prompt type the following command and press Enter:
Post any output you see in a help message on the Forum.
There are several possible things I know of, that can cause this:
- You recently connected an external monitor or TV to your computer. In this case, whenever calibre opens a new window like the edit metadata window or the conversion dialog, it appears on the second monitor where you dont notice it and so you think calibre has frozen. Disconnect your second monitor and restart calibre.
- If you use RoboForm, it is known to cause calibre to crash. Add calibre to the blacklist of programs inside RoboForm to fix this. Or uninstall RoboForm.
- The Logitech SetPoint Settings application causes random crashes in calibre when it is open. Close it before starting calibre.
- Constant Guard Protection by Xfinity causes crashes in calibre. You have to manually allow calibre in it or uninstall Constant Guard Protection.
- Spybot - Search & Destroy blocks calibre from accessing its temporary files breaking viewing and converting of books.
- You are using a Wacom branded USB mouse. There is an incompatibility between Wacom mice and the graphics toolkit calibre uses. Try using a non-Wacom mouse.
- On some 64 bit versions of Windows there are security software/settings that prevent 64-bit calibre from working properly. If you are using the 64-bit version of calibre try switching to the 32-bit version.
If none of the above apply to you, then there is some other program on your computer that is interfering with calibre. First reboot your computer in safe mode, to have as few running programs as possible, and see if the crashes still happen. If they do not, then you know it is some program causing the problem. The most likely such culprit is a program that modifies other programs’ behavior, such as an antivirus, a device driver, something like RoboForm (an automatic form filling app) or an assistive technology like Voice Control or a Screen Reader.
The only way to find the culprit is to eliminate the programs one by one and see which one is causing the issue. Basically, stop a program, run calibre, check for crashes. If they still happen, stop another program and repeat.
One common cause of failures on OS X is the use of accessibility technologies that are incompatible with the graphics toolkit calibre uses. Try turning off VoiceOver if you have it on. Also go to System Preferences->System->Universal Access and turn off the setting for enabling access for assistive devices in all the tabs.
You can obtain debug output about why calibre is not starting by running Console.app. Debug output will be printed to it. If the debug output contains a line that looks like:
Qt: internal: -108: Error ATSUMeasureTextImage text/qfontengine_mac.mm
then the problem is probably a corrupted font cache. You can clear the cache by following these instructions. If that doesn’t solve it, look for a corrupted font file on your system, in ~/Library/Fonts or the like. An easy way to check for corrupted fonts in OS X is to start the “Font Book” application, select all fonts and then in the File menu, choose “Validate fonts”.
Downloading from the Internet can sometimes result in a corrupted download. If the calibre installer you downloaded is not opening, try downloading it again. If re-downloading it does not work, download it from an alternate location. If the installer still doesn’t work, then something on your computer is preventing it from running.
- Try temporarily disabling your antivirus program (Microsoft Security Essentials, or Kaspersky or Norton or McAfee or whatever). This is most likely the culprit if the upgrade process is hanging in the middle.
- Try rebooting your computer and running a registry cleaner like Wise registry cleaner.
- Try downloading the installer with an alternate browser. For example if you are using Internet Explorer, try using Firefox or Chrome instead.
- If you get an error about a missing DLL on windows, then most likely, the permissions on your temporary folder are incorrect. Go to the folder C:\Users\USERNAME\AppData\Local in Windows explorer and then right click on the Temp folder and select Properties and go to the Security tab. Make sure that your user account has full control for this folder.
If you still cannot get the installer to work and you are on windows, you can use the calibre portable install, which does not need an installer (it is just a zip file).
The first thing to check is that you are downloading calibre from the official website: http://calibre-ebook.com/download. calibre is a very popular program and unscrupulous people try to setup websites offering it for download to fool the unwary.
If you have the official download and your antivirus program is still claiming calibre is a virus, then, your antivirus program is wrong. Antivirus programs use heuristics, patterns of code that “look suspicious” to detect viruses. It’s rather like racial profiling. calibre is a completely open source product. You can actually browse the source code yourself (or hire someone to do it for you) to verify that it is not a virus. Please report the false identification to whatever company you buy your antivirus software from. If the antivirus program is preventing you from downloading/installing calibre, disable it temporarily, install calibre and then re-enable it.
The most important thing to backup is the calibre library folder, that contains all your books and metadata. This is the folder you chose for your calibre library when you ran calibre for the first time. You can get the path to the library folder by clicking the calibre icon on the main toolbar. You must backup this complete folder with all its files and sub-folders.
You can switch calibre to using a backed up library folder by simply clicking the calibre icon on the toolbar and choosing your backup library folder. A backed up library folder backs up your custom columns and saved searches as well as all your books and metadata.
If you want to backup the calibre configuration/plugins, you have to backup the config directory. You can find this config directory via Preferences->Miscellaneous. Note that restoring configuration directories is not officially supported, but should work in most cases. Just copy the contents of the backup directory into the current configuration directory to restore.
Most purchased EPUB books have DRM. This prevents calibre from opening them. You can still use calibre to store and transfer them to your ebook reader. First, you must authorize your reader on a windows machine with Adobe Digital Editions. Once this is done, EPUB books transferred with calibre will work fine on your reader. When you purchase an epub book from a website, you will get an ”.acsm” file. This file should be opened with Adobe Digital Editions, which will then download the actual ”.epub” ebook. The ebook file will be stored in the folder “My Digital Editions”, from where you can add it to calibre.
A permission denied error can occur because of many possible reasons, none of them having anything to do with calibre.
- You can get permission denied errors if you are using an SD card with write protect enabled.
- If you, or some program you used changed the file permissions of the files in question to read only.
- If there is a filesystem error on the device which caused your operating system to mount the filesystem in read only mode or mark a particular file as read only pending recovery.
- If the files have their owner set to a user other than you.
- If your file is open in another program.
- If the file resides on a device, you may have reached the limit of a maximum of 256 files in the root of the device. In this case you need to reformat the device/sd card referered to in the error message with a FAT32 filesystem, or delete some files from the SD card/device memory.
You will need to fix the underlying cause of the permissions error before resuming to use calibre. Read the error message carefully, see what file it points to and fix the permissions on that file.
Most readers do not support this. You should complain to the manufacturer about it and hopefully if enough people complain, things will change. In the meantime, you can insert the metadata, including comments into a “Jacket page” at the start of the ebook, by using the option to “Insert metadata as page at start of book” during conversion. The option is found in the Structure Detection section of the conversion settings. Note that for this to have effect you have to convert the book. If your book is already in a format that does not need conversion, you can convert from that format to the same format.
Another alternative is to create a catalog in ebook form containing a listing of all the books in your calibre library, with their metadata. Click-and-hold the convert button to access the catalog creation tool. And before you ask, no you cannot have the catalog “link directly to” books on your reader.
By default, calibre uses whatever proxy settings are set in your OS. Sometimes these are incorrect, for example, on windows if you don’t use Internet Explorer then the proxy settings may not be up to date. You can tell calibre to use a particular proxy server by setting the http_proxy environment variable. The format of the variable is: http://username:password@servername you should ask your network admin to give you the correct value for this variable. Note that calibre only supports HTTP proxies not SOCKS proxies. You can see the current proxies used by calibre in Preferences->Miscellaneous.
For many reasons:
- There is no need to update every week. If you are happy with how calibre works turn off the update notification and be on your merry way. Check back to see if you want to update once a year or so.
- Pre downloading the updates for all users in the background would require about 80TB of bandwidth every week. That costs thousands of dollars a month. And calibre is currently growing at 300,000 new users every month.
- If I implement a dialog that downloads the update and launches it, instead of going to the website as it does now, that would save the most ardent calibre updater, at most five clicks a week. There are far higher priority things to do in calibre development.
- If you really, really hate downloading calibre every week but still want to be up to the latest, I encourage you to run from source, which makes updating trivial. Instructions are available here.
calibre is licensed under the GNU General Public License v3 (an open source license). This means that you are free to redistribute calibre as long as you make the source code available. So if you want to put calibre on a CD with your product, you must also put the calibre source code on the CD. The source code is available for download from googlecode. You are free to use the results of conversions from calibre however you want. You cannot use code, libraries from calibre in your software without making your software open source. For details, see The GNU GPL v3.
First, you must install calibre onto your linux server. If your server is using a modern linux distro, you should have no problems installing calibre onto it.
If you bought into the notion that a real server must run a decade old version of Debian, then you will have to jump through a few hoops. First, compile a newer version of glibc (>= 2.10) on your server from source. Then get the calibre linux binary tarball from the calibre google code page for your server architecture. Extract it into /opt/calibre. Put your previously compiled glibc into /opt/calibre as libc.so.6. You can now run the calibre binaries from /opt/calibre.
You can run the calibre server via the command:
/opt/calibre/calibre-server --with-library /path/to/the/library/you/want/to/share
You can download news and convert it into an ebook with the command:
/opt/calibre/ebook-convert "Title of news source.recipe" outputfile.epub
If you want to generate MOBI, use outputfile.mobi instead and use --output-profile kindle.
You can email downloaded news with the command:
I leave figuring out the exact command line as an exercise for the reader.
Finally, you can add downloaded news to the calibre library with:
/opt/calibre/calibredb add --with-library /path/to/library outfile.epub
Remember to read the command line documentation section of the calibre User Manual to learn more about these, and other commands.
Some parts of calibre require a X server. If you’re lucky, nothing you do will fall into this category, if not, you will have to look into using xvfb.